TL elektronic Thermometer TL-2624

The TL-2624 Thermometer is a multifunctional thermometer which can replace several standard instruments necessary for monitoring your engine. The Thermometer enables you to measure up to four temperatures such as EGT, CHT, water temperature, oil temperature and oil pressure. Using the servo placed on your engine, the Thermometer enables to control automatically the choke according to any of the measured temperatures. You can easily set all limit values in your Thermometer with help of the buttons, and the instrument will monitor them for you. Using a PC and the program, which is a part of delivery, the Thermometer also enables you anytime to go through the history of measured values. The TL-2624 gives you the option to use up to four temperature inputs and one oil pressure input. Use the automatic choke control function using a servo regulated by the Thermometer according to any of the measured temperatures e.g. CHT. Set the limit values at two levels (Warning and Alarm) for all measured quantities; in case of exceeding these limits, the instrument will warn you of possible engine failure or damage. Set the mode of displaying temperature: by gradual switching of the measured temperatures on the display, or by enabling the SCAN function, or by displaying the temperatures approaching the limit values you have set. Always be informed on the temperature reaching the limits and the differences e.g. in EGT temperatures, which could result in engine failure. TL-2624 Thermometer functions: Display immediately the maximum reached temperature, pressure etc. by pressing the external button Using your PC, download at any time the history of the measured temperature (or pressure) values Connect your Thermometer to the output of the signalisation unit, which will warn you of the exceeded temperature limits Connect your Thermometer with the Intercom, using the iFamily® Bus, and gain the option of having a voice alert of the exceeded values You can at any time download the latest version of the firmware to your Thermometer, thereby always having the latest functions we prepare for you Measures EGT and CHT temperatures using thermocouple sensors of the type K and J Measures the temperature of oil and water Displays in °C or °F Measures oil pressure using resistive sensors or sensors with the voltage output High-precision measurement Simple two-button control using the nav-menu History of the measured values with use of the SchecK method User-programmable external button for the quick selection of any function Technical parameters: Voltage: 10.0 to 32.0 Volts Backlights internal or external: 5V, 12V or 24V Current consumption: 50 to 250 mA @ 14 Volts Maximal voltage and signal current: 30 Volts, 1 Ampere Measurement: +/-1%(not including sensor accuracy) Resolution: 1°C (1.8°F), 0.1 bar (1.45PSI) Operating: -20°C to 70°C (-4°F to 158°F) temperature range Relative humidity: 95% without condensation Load: +/-20 g Vibration: 1 to 200 Hz Weight: 250 grams (0,55 lbs) Dimensions: 71x67x45 mm (2.795x2.637x1.771 inch) Diameter hole: 57 mm (2 1/4") EGT input for thermocouple probe: -40 °C to 1100 °C by environmental temperature 25 °C CHT input for thermocouple probe: -20 °C to 800 °C by environmental temperature 25 °C Input for pressure sensor: active 0 to 5 Volts / passive 0 to 500 ohms Input for temperature sensors: PT-100 or VDO silver line with black isolator Choke control via analog modal servo (external power for servo required) Communication line with a PC via standard RS-232c